This series of Cameras are the most sensitive in the Spectronic Line. Suitable for demanding low light level spectroscopy. They use CCD full frame detectors from Hamamatsu. The detectors are two dimensional arrays with pixel formats of 64 X 512 up to 256 X 1024. They provide digital outputs of electro-optical signals so that, in conjunction with microprocessors or personal computers, evaluation of signals can be readily implemented without the user having to possess specialized knowledge of electronics.

Spectronic 301, New driver 28/1 2003. Menu in Datalyse: Measure at one wavelength Spectrum, wavelength scan Baseline, wavelength scan. You can also use the terminal program in Datalyse with the spectrophotometer. Spectronic 301 is connected to the pc with an ordinary serial cable, the cable must be 9 pin female at the device end though. 'The technical and intellectual support from the team at Teledyne SP Devices has been playing an important role in our research.' Associate Professor at Hong Kong University (HKU) who has implemented a system supporting line scan rates of 10M lines/s. Right Angle Female 'F' Jack to RCA Male Plug Adapter (van120060X). Integrated driver process flow US6822797B1 (en) 2002-05-31: 2004-11-23: Silicon Light Machines, Inc. Spectronic Devices Ltd: Optical detector apparatus.

PC interfaces available USB, RS232 and Parallel port.

The two Unknown Devices are part of the Dell Client System Analyzer software =. DellProf is the Dell System Analyzer Control Device. DD Driver is the Dell Diags Device Driver.

Driver software and demonstration software supplied.

The detectors are used in 'line Binning'mode'. Thiseffectively produces a detector of just one line of 512 or 1024 pixels. Thisresults in very high sensitivity and very low noise.

[Description of the Camera Electronics]
Sveon sound cards & media devices driver download for windows 10.

Camera Features

Number of sampling photo-diodes	512 x 64, 128, 256 or 1024 x 64, 128, 256
Spectral range	190 nm through 1100nm
Pixel center to center spacing	25 µm,
Digital resolution	16 bits
Scan time	16 µs each pixel
Data Storage in camera	512kbyte, ( 1 Mbyte optional)
Cooling	-10degC air cooling (-50degC with chiller)

Spectrum of Back illuminated CCD detector.

(Note the high sensitivity in UV)

ThermoSpectronic: Genesys 6, 8, 10, 20
Unicam Helios e
Spectronic 301

Genesys 6

Menu in Datalyse

Measure at one wavelength

Spectrum, wavelength scan

Baseline, wavelength scan

Zero value

You can also use the terminal program in Datalyse with the spectrophotometer.

Genesys 6 is connected to the pc with an ordinary serial cable, the cablemust be 9 pin female at the device end though. You can buy a converter ifnecessary.

Baud rate 19200, no parity, 1 stop, 8 data bits.

Command MODEL for model and REV for software version.

The command »SAMPLE« makes the spectrophotometer send the absorbanceto the pc.

Wavelength interval: 190 nm - 1100 nm

It is possible to measure absorbance, transmittance and concentration.Spectral bandwidth 1.8 nm.

Genesys 8

Menu in Datalyse

Measure at one wavelength

Spectrum, wavelength scan

Baseline, wavelength scan

Zero value

Release control

Spectronic 8 Genesys is connected to the pc with zero-modem cable, the cable must be 9 pin mail- female. Baud rate 9600, no parity, 1 stop, 8 data bits.

Genesys 8 canscan a spectrum when you use it off-line. For each scan you choose the firstwavelength and the last wavelength. A scan consists of two processes, 1measuring the base line and 2 the actual scan. It is a little cumbersome andslow.

Unfortunatelythe Genesys 8 does not have a command for scan. Hence Datalyse performs a scanby first measuring the base line. This scan is placed in column C in the table.At any following scan the base line is automatically subtracted. This methoddoes however require that you measure at the same wavelengths as you did whenmeasuring the base line. Genesys scans slowly this way. Choose large steps, e.g.10 nm.

This methodis not as good as a real scan and you might as well be using the cheaper deviceGenesys 20.

Menu in Datalyse

Measure at one wavelength
Spectrum, wavelength scan
Baseline, wavelength scan
Zero value

You can also use the terminal program in Datalyse with the spectrophotometer.

Genesys 10 is connected to the pc with an ordinary serial cable, the cablemust be 9 pin female at the device end though. You can buy a converter ifnecessary.

Baud rate 19200, no parity, 1 stop, 8 data bits.

Command MODEL for model and REV for software version.

The command »SAMPLE« makes the spectrophotometer send the absorbanceto the pc.

Synnex laptops & desktops driver download. Wavelength interval:

Model UV: 190 nm - 1100 nm

Model VIS: 325 nm - 1100 nm

It is possible to measure absorbance, transmittance and concentration.Spectral bandwidth 5 nm.

Spectrum and baseline:

Genesys 10 does not have a command for scan. Hence Datalyse performs a scanby first measuring the base line. This scan is placed in column C in the table.At any following scan the base line is automatically subtracted. This methoddoes however require that you measure at the same wavelengths as you did whenmeasuring the base line.

Scanning might be problematic, since the spectrophotometer often get out ofrange. If you experience problems, try reducing the wavelength interval to forinstance [400 nm; 800 nm] and remember that an ordinary cuvette does absorblight in the UV-area.

Genesys 20, version 1,11

Menu in Datalyse:

Measure at one wavelength
Spectrum, wavelength scan
Baseline, wavelength scan
Zero value

You can also use the terminal program inDatalyse with the spectrophotometer.

Genesys 20 is connected to the pcwith an ordinary serial cable, the cable must be 9 pin female atthe device end though. You can buy a converter if necessary.

Baud rate 9600, no parity, 1 stop, 8 data bits.

Command MODEL for model and REVfor software version.

The command »SND« makes thespectrophotometer send the absorbance to the pc.

Spectrum and baseline:

Genesys 20 does not have a command for scan. Hence Datalyse performs a scanby first measuring the base line. This scan is placed in column C in the table.At any following scan the base line is automatically subtracted. This methoddoes however require that you measure at the same wavelengths as you did whenmeasuring the base line. Genesys scans slowly this way. Choose large steps, e.g.10 nm.

Unfortunately the device is only capable ofsending the absorbance to the pc. There is not any command forreading the chosen wavelength either.

Spectronic 301 can do both! It would be quiteeasy to correct this software error!

Moreover the device has only one cell.

The codes f

ThermoSpectronic: Genesys 6, 8, 10, 20

Unicam Helios e

Spectronic 301

Genesys 6

Genesys 8

Spectronic Devices Driver